|
| |
|
|
Use of laser technology in conditions of job-order manufacture
Popela, Martin ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The thesis is focused on theoretical analysis and physical description of laser beam technology. It deals with possibilities and concrete methods of laser technologies in perspective of metal machining and in detail it describes CO2 laser and its inclusion to the manufacturing process in concrete engineering company. Further it describes the components base and the construction technology of typal representatives. The thesis includes the proposition of solution of increase the productivity of the laser workplace and also technical and economical evaluation of this technology.
|
|
|
Design and realization of CO2 laser with power up to 100W
Šrenk, Jakub ; Dvořák, Jaromír (referee) ; Slaný, Martin (advisor)
This work is focused on the problematics of small CO2 lasers and their possible use for commercial production. The first part describes devices available on the market and evaluation of their parameters. The practical part specifies the parameters that arise from the potential use of technology. Based on these parameters, design of the machine and its complete mechanical design are elaborated. Furthermore, the experimental part deals with the design of structural components, control system, electrical systems and in general a complex technical-technological solution of the equipment, including economic evaluation of the design. Part of the work is also the construction of the machine itself, including activation, adjustment and debugging for the considered production. The constructed machine was subject to testing to ensure required quality of production.
|
|
|
Laser micromachining
Láznička, Pavel ; Daněk, Ladislav (referee) ; Mrňa, Libor (advisor)
This thesis deals with lasers, their general theory and application. Then a theoretical part describes laser micromachining and engraving. Experimental part of thesis deals with several experiments performed by powered fibre laser which is not primarily intended for the field of micromachining. Experiments were mainly evaluated by several types of microscopes where the amount of removed material was appraised. By particular experiments removed material was in accordance with used working parameters of laser and a significant role plays machining material. It emerges from the experiments that for the field of laser micromachining and engraving shorter pulses are more suitable (minimal pulse duration was 1 ms in experiment) and it is connected even with a way of removing material. Applied powered laser can be used for micromachining in specific fields of production.
|
|
|
The analisys of possibility laser cutting
Plevka, Vojtěch ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
Master’s thesis deals with application of lasers in manufacturing, mainly with the technology of cutting material. This technology is compared with the technology of punching and cutting sheet metal, with the aid of control specimens. The parameters of surface structure, dimension accuracy and appearance of cut-ting surfaces are compared. By consensus of results the recommendation for practical realization was created.
|
|
|
Production of handrail holder
Ryšavý, Jan ; Varjan, Matúš (referee) ; Peterková, Eva (advisor)
Economic and technological analysis of possible methods of production real part. The basic theoretical knowledge of selected production methods and their application in practice. The division of production methods for various production series of part using economic evaluation.
|
|
|
Manufacturing of Components Using the Waterjet Method
Petřek, Lukáš ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The present bachelor thesis deals with the technology of high pressure hydroabrasive jet. The work is divided into several parts, where the first part analyzes the working principle of technology and compares the measured arithmetic mean deviation of the profile Ra on the cutting edges of the sample after incision by high pressure hydroabrasive jet with the arithmetic mean deviation of the profile Ra given by technology manufacturer, Furthermore it presents a division of abrasives including their recycling and an impact of wastewater on the environment. The second part focuses on the description of individual components of the above technology. The following third part is devoted to the company Rychlý TOM engaged in the production and cutting of material using this technology. In addition, the fourth part discusses the production of individual components. New trends in the area of technology of high pressure hydroabrasive jet are presented in the last part. Finally the thesis provides a discussion and conclusion.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Analyssis of conventional technologies for sawing.
Kašpar, Ladislav ; Osička, Karel (referee) ; Zemčík, Oskar (advisor)
In this work is a survey of conventional method of cutting of material used on common technological routine processed.Principle, used instruments, which are disposed and described in detail and example of used machines and its basic technical parameters are mentioned in each way of material division.In the end examples of aplications of these methods in production practise and summary of advantages and disadvantages of its use is mentioned.
|
|
|
Technology of laser machining
Kroupa, Jiří ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
This bachelor thesis is focused on present possibilities of laser cutting. The first part describes basic principles of the laser beam, possibilities of ma-chining of various materials and its use in production. Various types of lasers are introduced, including those developed in the last decade. The performance and quality edge that the laser beam can give you is presented in the next part. The practical part compares laser machining with conventional technology of machining. Final results are evaluated in the last chapter.
|
guest ::
